Carrier Comfortlink Navigator Replacement LCD
CARRIER COMFORTLINK NAVIGATOR REPLACEMENT LCD MODULE 230$ Canadian / 180$ US (as of Sept 2023 exchange rate)
THIS IS A THIRD-PARTY DISPLAY (LCD) REPLACEMENT THAT FITS PERFECTLY IN PLACE OF THE ORIGINAL LCD. IF YOUR DISPLAY IS BROKEN THIS IS THE PART TO REPLACE IT.
CONTACT US AT +1 (438) 448-0782 OR EMAIL US TO ORDER. You can also order from this link (only valid for orders from US).
Only the internal part on the picture is included (third party fully compatible LCD module with ribbon cable).
We have two color options: black on yellow backlight or white on blue backlight. We can normally ship within 24 hours of ordering.
Don’t throw away your broken ComfortLink Navigator if you break the screen!
Replacement can be easily done by yourself. Only need to remove the 6 screws at the back. Then carefully open split the front and back disconnecting the ribbon cables (gently pull each side of the tabs to unlock the ribbon cables). Then remove the LCD module (unscrew the 4 screws), install the new modules in place (the top part has the second pcb attached to it). Reconnect the ribbon cables for the keys (push back gently in pace the tabs) and then connect the LCD module again pushing back the tabs gently to ensure the ribbon cable is kept in place. We will send you extra pictures for installation instruction.
We also can do the replacement without any labour cost. You will only need to pay for shipping the unit to our location and for the extra shipping cost to ship it back to you (we will only charge for the shipping difference between the shipping cost for the LCD module and the shipping cost of the unit). Shipping insurance increase the shipping cost and you will be able to decide how much shipping insurance should be declared when we send it back.
The LCD module has been tested and contrast has been calibrated. You can modify the contrast by tuning the potentiometer on the board.